US Battery Charger Maintainer 6V & 12V Amp Volt Trickle RV Car Truck

Brief: This device is 4 stages smart battery charger by  Microprocessor controlled with switch mode for 6V and 12V is selectable output .it is ideal for charging your CAR,MOTORCYCLE AND RIDE-ON TOY batteries,suit for type of batteries included AGM GEL VRLA SLA WET and deep-cycle.
4-stage charging process:Stage 1:initialization,when the charger power on then it start self-check and detect the battery correct connect. low output voltage without battery Fault LED is light, please CHECK THE POLARITY IS CORRECT.Stage 2:Bulk charge,using the charger highest rated current for the type of battery in use until it reaches 80% capacity( LEDs 50% blinking ,100% OFF)Stage 3:Absorption,the output voltage is limited to 7.3V(6V battery) or 14.5V(12V battery) while current declines as the battery charges to its full capacity without overheating( LEDs 50% ON ,100% blinking)Stage 4:Float,At this stage,the battery is fully charged and the charger maintains the battery through pulse charging( LEDs 50% ON ,100% ON)
IMPORTANT WARNING:Before charging,make sure the correct battery voltage with the device voltage as same.
SPECIFICATION:Input: 100-240VAC@50/60Hz  0.5rmsOutput: DC 6.9V@ 1.5AmpDC [email protected] Limited voltage: 7.2~7.3V or 14.5~14.7V     Float current: 300mA~400mACharging mode: Fully automaticSuitable battery: 6V or 12V AGM GEL VRLA SLA WETCharging Battery : 6-12Ah   Maintaining Battery: 4-36AhCharger Size: 85X53X39mmSafety: EN60950-1 EN60335EMC: EN55022Approved: CE  RoHS
You'll Receive:Battery Charger  x1DC Output Cable with Clamp Connectors   x1DC Output Cable with Ring Connectors   x1User Manual   x1

Located in: Flushing, New York, 11354 United States