Arcam FMJ AVR600 HDMI 1.4 3D 120 watts x 7 channel Theater Receiver, pre

Arcam FMJ AVR600 HDMI 1.4 3D 120 watts x 7 channel Theater Receiver, pre amp.
As you can see in picture the power button is held from a tape, as it sometimes it pops out. I have this replacement original power switch, which I will include with the sale. You can get it replaced if you like. I have been using this for months w/o any trouble with the tape.
Comes with remote. Works flawlessly. All channel has full amplification. No other trouble than this damn power switch.
Specs are:
Analogue Audio

120WPC continuous power output into 4 or 8 ohms loads (all 7 channels driven at 1kHz)

Stereo output power over 150WPC into 4 or 8 ohms, 20Hz to 20kHz

Huge toroidal power transformer and high efficiency class G amplifier ensures ample power for even the most demanding programme material

In 5.1 speaker setups channels 6 & 7 assignable to bi-amplify front left and right or for use in Zone 2

Audiophile quality components for best sound quality

Multi-channel 7.1 analogue input for DVD-A or SACD sources

Stereo direct mode bypasses and disables all digital processing for 2 channel analogue sources

9 stereo analogue inputs (including one MM phono input & front 3.5mm AUX input)

Zone 2 stereo audio, from analogue inputs (Source and volume control independent from main zone)

Zone 3 stereo audio, from analogue inputs

Linked to Zone 2, volume control independent

DAB/FM/AM or FM/AM stereo tuner with 50 presets

Sirius Home Connect compatible input

Support for iPod via Arcam rLead / rDock (independent of RS232 connection)

Digital Audio

State of the art Analog Devices ADSP-21366 & ADSP-21367 DSPs for surround decoding

Crystal Semiconductor 24bit 192kHz DACs, stereo ADC and precision electronic volume controls

Dolby TrueHD, Dolby Digital+, Dolby Digital EX, Dolby Pro Logic IIx, DTS HD Master

Audio, DTS High Resolution Audio, DTS-ES Discrete, DTS-ES Matrix, DTS96/24, DTS Neo:6

Dolby Volume processing for balancing of program material gain and tonal balance

Adjustable crossover switching 40Hz, 60Hz, 80Hz, 100Hz, 120Hz, 150Hz

8 digital inputs 4 rear optical, 3 co-axial, 1 front 3.5mm optical AUX input

Global audio delay, adjustable from 0-1000 milliseconds, to compensate for video processing delays in digital displays and sources

USB input for audio file playback from UPnP mass storage devices

Ethernet connection for Internet Radio and audio streaming

Video

5 HDMI inputs (up to 1080p, Deep Colour)

2 HDMI outputs (up to 1080p, Deep Colour)

5 Component inputs, one monitor output (up to 1080i)

5 S-video inputs, one monitor output, 2 tape outputs

5 Composite video inputs, one monitor output, 2 tape outputs

Full video up/down conversion & frame rate conversion of all inputs where technically allowed

Video enhancements: Edge enhancement, Mosquito noise reduction, Random noise reduction, Block noise reduction

Custom Install Features

Independent Zone 2 (audio & video), with fixed/variable volume

Zone 3 audio with fixed/variable volume

RC-5 remote input jacks for all three zones

IR pass through for source components

Full suite of discrete IR RC-5 codes, including separate on / off etc

12Volt triggers, on / off for zones 1, 2 and 3

Full duplex RS232 control input for more complex control systems

General

Supplied with back-lit CR102 learning remote

control with support for up to 7 other

components and a huge on-board code

library

Large, high contrast dimmable VFD front

panel display

User switchable between 120 & 230Volt

mains supplies

Size – 435mm (17.1in) wide, 435mm (17.1in)

deep, 185mm (7.3in) high

Weight 64 lbs

Returns Accepted for this item if it's within 14 Days