Alpine 7909 Cd Player
, Restored And Fully Tested. Old School Alpine Pull Out
USD $2,100.00
Condition : Used
Free Shipping
{{variant_type_name}} :
Notify me when the price drops
We will email you if we find a lower price on this product!
This is a 7909 US Pull-Out version.
It has the pull out sleeve(cage) and wire harness.
Every electrolytic capacitor has been replaced.
Capacitors are all quality parts purchased from reputable suppliers such as Mouser. Parts used are all Rubycon, Panasonic, Murata, Nichicon, or Kemet.
Correct SMT parts have been used on the deck controller PCB. There has been no mixing of SMT/Through Hole parts.
I used aluminum organic polymer capacitors for the 10uF on the main PCB.
The DC-DC convertor has also been rebuilt with new Rubycon 7000 hour long-life electrolytic capacitors.
The DC-DC convertor shield was opened carefully, so it has not been hacked up.
All of the PCBs have been thoroughly cleaned with IPA. There are no damaged traces or via holes that have been patched.
Correct de-soldering tools tools have been used.
The switches in the front panel have been replaced. All have a nice solid click feel.
The batteries have also been replaced.
The volume control operates smoothly. There is no scratchy sound when turning the Volume/Fader/Balance controls.
The Bass/Treble controls also operate smoothly and without noise.
The CD mechanism has been completely cleaned and lubricated.
Please check the last photograph showing an oscilloscope waveform.
The is the CD RF Eye pattern. The clearly defined diamond pattern shows that the laser is working properly.
It will play burned CD-Rs without any problems.
It does not skip when subjected to shock.
The AM/FM tuner works as it should. It will tune weak stations without any problems.
The wire harness is complete and original.
Please contact me with any questions or concerns.
It has the pull out sleeve(cage) and wire harness.
Every electrolytic capacitor has been replaced.
Capacitors are all quality parts purchased from reputable suppliers such as Mouser. Parts used are all Rubycon, Panasonic, Murata, Nichicon, or Kemet.
Correct SMT parts have been used on the deck controller PCB. There has been no mixing of SMT/Through Hole parts.
I used aluminum organic polymer capacitors for the 10uF on the main PCB.
The DC-DC convertor has also been rebuilt with new Rubycon 7000 hour long-life electrolytic capacitors.
The DC-DC convertor shield was opened carefully, so it has not been hacked up.
All of the PCBs have been thoroughly cleaned with IPA. There are no damaged traces or via holes that have been patched.
Correct de-soldering tools tools have been used.
The switches in the front panel have been replaced. All have a nice solid click feel.
The batteries have also been replaced.
The volume control operates smoothly. There is no scratchy sound when turning the Volume/Fader/Balance controls.
The Bass/Treble controls also operate smoothly and without noise.
The CD mechanism has been completely cleaned and lubricated.
Please check the last photograph showing an oscilloscope waveform.
The is the CD RF Eye pattern. The clearly defined diamond pattern shows that the laser is working properly.
It will play burned CD-Rs without any problems.
It does not skip when subjected to shock.
The AM/FM tuner works as it should. It will tune weak stations without any problems.
The wire harness is complete and original.
Please contact me with any questions or concerns.
Returns Accepted for this item if it's within 30 Days
Price type
IN STOCK
OUT STOCK
.
